Pressure Sensors

view options
ME504
PRESSURE RANGE fso (bar) 0.5-1-2-5-10-20-50-100-200-400-600-800 bar
PRESSURE TYPE GAUGE - SEALED GAUGE - ABSOLUTE
TECHNOLOGY PIEZORESISTIVE CERAMIC PRESSURE SENSOR
DIAMETER (mm) 18.00 mm
STRUCTURE FLUSH DIAPHRAGM
THERMAL DRIFT %FS/°C ≤ ± 0.03 % FS/°K
SIGNAL CONDITIONING NO
OFFSET 0.0 ± 5.0 mV/V
TERMINATION PITCH 4 pads, 2.54 mm
SIGNAL OUTPUT DIFFERENTIAL SIGNAL mV/V

Metallux ME504 pressure sensors are made with a ceramic base cell and a flush diaphragm and work following the piezoresistive principle. The Wheatstone bridge is screen printed on one side of the flush ceramic diaphragm which is, in turn, glued to the sensor’s body. The bridge faces the inside where a cavity is made and the diaphragm’s opposite side can therefore be exposed directly to the medium to be measured. Because of the Al2O3 ceramic excellent chemical resistance (aggressive gases, most of solvents and acids, etc.), no additional protection is normally required. On the sensor body, layout is optimized to allow easy mounting of signal conditioning PCB when requested. Metallux ME504 sensors are thermally compensated by laser-adjustable PTC resistors and the use of ceramic ensures a high linearity across the entire range of measurement, reducing effects of hysteresis to a minimum.